• Integrated temperature probe
  • Wall-heated, all-in-one breathing circuits
  • Adjustable temperature and humidity settings
  • Remote control from any compatible ventilator
  • Pre-assembled and ready for use

The HAMILTON-H900 humidifier has been developed with focus on ease of use and patient safety allowing caregivers to focus on the important aspects of patient care. It offers an innovative two-step set up to get you started quickly. All connections on a humidifier are in a single breathing set enabling one-hand operation. Due to the ergonomic design, the user interface can be easily seen and provides all needed information at a glance.
Smoothbore breathing sets with embedded heater wires – available for adults, pediatrics, and even neonates – lead to significantly reduced condensation. This, in turn, ensures the delivery of the set level of humidity to the patient. Thanks to the integrated temperature probe, extra working steps belong to the past.

The HAMILTON-H900 humidifier provides active humidification for adults, pediatrics, as well as for even your smallest patients. A special breathing circuit set with a detachable, unheated extension allows use in incubators.

The ventilator supports the following types of modes:

The breathing circuit sets for the HAMILTON-H900 humidifier integrate the heater wires into the circuit wall. This eliminates the cold interface between heated breathing gas and ambient temperatures and leads to significantly reduced condensation in the breathing circuit. This, in turn, ensures the delivery of the set level of humidity to the patient.

As every patient is different and environmental conditions may require important modifications, the HAMILTON-H900 humidifier allows for manual adjustment of the chamber exit temperature and the temperature gradient.You can adapt the humidifi cation therapy to suit the individual patient and surroundings, and easily avoid having too much condensation in the tubing, flow sensor, or flex tube by adjusting the humidity level.

The cable-free breathing circuit sets already include the temperature probe and electrical connection to save extra work and reprocessing costs.

The breathing circuit can be installed with just one hand and incorporates the temperature probe and heater wires that connect automatically on installation. There are no extra cables to connect, and you simply need to slide the water chamber into the humidifier, connect the breathing circuit to the patient and connect a water source to the water chamber.

An innovation of the HAMILTON-H900 is that it comprises only two components: The wall-heated breathing circuit set and the humidifier base. This saves time and facilitates handling of the humidifier, as well as reducing the risk of contamination. The breathing circuit sets can be used up to 28 days per patient.

Due to the ergonomic design, the user interface can easily be seen and operated from a standing position. All settings and related monitoring values are visible without searching through menus. A large, highcontrast LCD display, bright alarm lamp, and audible alarm alert you if user interaction is required

The HAMILTON-H900 automatically checks each tube connection, as well as identifying the water chamber and circuit types. In addition, the humidifier automatically detects high and low water levels, and generates an alarm when it is running low on water. Ensuring the patient is always ventilated with humidification protects the functionality of mucociliary clearance.